The area behind my garage has now been dug out to 11 feet but I
will only be putting in a 10.5 foot slab. Also I have removed
part of my garage wall to expand it out. Here are two pics.
After the slab cures and I take the tent down I will post pics.
'66 Mustang Sheet Metal
(12/12/04 3:30PM)
Ditch Diggin!
(11/29/04 9:40PM)
Mustang and MiniChopper
(11/08/04 1:11PM)
Added Another Mustang to My Corral
(11/01/04 4:00PM)
More work on my Dodge Bucket
(08/16/04 6:15PM)
Sold My Fiero
(08/01/04 8:59PM)
Bought another Mustang
(07/17/04 8:00PM)
Ford 9" Rearend
(05/02/04 3:19PM)
Archived News
(04/06/04 4:40PM)
Got My Model
(04/02/04 9:48PM)
Media Blaster Update
(03/29/04 4:32PM)
D-Bucket Update
(03/24/04 2:05PM)
MIG Welder
(03/24/04 1:33PM)
Interesting Thing
(03/18/04 1:00PM)
Sand/Media Blaster Project - Update
(03/14/04 10:00PM)
OH MAN!
(03/08/04 4:23PM)
Sand/Media Blaster Project
(02/25/04 6:09PM)
Another Oddy
(01/16/04 9:50AM)
Sand Blasting
(01/11/04 3:31AM)
Mustang Update
(01/07/04 6:20PM)
News Archives
Today I got my sheet metal for the '66 Mustang. I got both toe
boards, drivers side front floor, passnegers side full floor and
seat riser, radiator core support and all 4 fender splash shields.
Click the picture to check out the pictures of the stuff!
I have dug this area out behind my garage to build a 8'X12'
storage / air compressor room. I am going to have a slab laied
down and build a 4' tall cinder block wall. Then build the rest
of the wall the normal way. Click the picture...
I ordered all the sheet metal for the '66 Mustang and it should
be here soon. I got passengers side full floor, toe board,
full quarter panel and drivers side front floor and toe board.
Also I bought this little minibike-chopper for the heck of it.
I got this one a few months back. Its got all the options you
in a Mustang, 289 V8, Power Steering, Disk Brakes, Automatic
Trany and a Limited Slip rearend! Click the picture:
I finaly cut the main frame members for my Dodge Bucket.
The hotrod is going to be a bit long. Check it out: Dodge Bucket Frame
I sold that thing on E-Bay. I might get another someday and
put a V8 in it. But for now I have lots of other things I'm
more interested in working on.
I got a 1970 Mustang that needs a transmission. Check it
out! Click the picture to goto the page!
Well its been a long time sence I posted anything to my site
here. Yesterday I found a Ford 9" rearend with disk brakes
out of a '78 Lincoln. It's a heavy beasty to! I bought it and
hauled it home. I'm not sure if I will use it on my '65 Mustang
or my Dodge Bucket. Well click the picture to goto the page for it
I have now started to archive the stuff on this page to try
and keep the default page loads to a minimum size. Goto the
bottom of this page to get to all of 2003 stuff.
Just over 2 years ago I ordered a 1/8th scale 1932 Ford Highboy
HotRod model. Well I finaly got it, cost me $100. Found out that
this is a remake of the 'Big Deuce' model that Monogram produced in
the '60s. Well here is a picture of it. Click on it for a big pic.
It seems like every Monday I have something to put up on this
page. I don't always put the update notice here in the news but
I have stuff updated weekly. Check it out: Blast Cabinet
When I got the MIG gas I also got steel to do the D-Bucket frame.
I'm going to put the '65 Mustang on hold for a while. It's gona
cost me to much right now. Check out the cool steel on the D-Bucket page.
My wirefeed welder is now upgraded to a MIG welder. It welds a lot
nicer now. I have to crank the heat up to make the same size bead
as I did with the flux core wire though. Check out the pictures on
my Garage page. I even have pictures of a weld!
I had taken the quarter panel extentions off of my '65 Mustang
and set them on my bench. I put them togeather and thought that
they had an interesting look. Might be cool for the rear of a
chopper fender or something.
I have a lot more done on my Mediablast cabinet. This project
is taking a lot more time and money than I would have thought!
Well here is the link again: Blast Cabinet
Not bad! This kicks ass!
For some time I have been tinkering with an idea about making
my own sand blasting cabinet. I started it a few weeks back and
thought I would post info about it. Its really big! Check it
out on my new page for it: Blast Cabinet
You got a Chevy El Camino, Ford Ranchero, and now a Pontiac Fiero...
I started sand blasting parts. Well ok I started media blasting
(glass bead) parts. Check out the page here: Blasted Parts
I have added some pictures of my '65 Mustang. Just 4 pictures of
rear after I striped all the parts off of the back. I had to do
something during a snow day. Check out my '65 Mustang page.
Year 2003